6.5 MW
Rated power
171 m
Rotor diameter
22,965 m²
Swept area
283 W/m²
Specific power
Specification
Rotor & rating
- Rated power
- 6.5 MWp.4
- Rotor diameter
- 171 m
- Swept area
- 22,965 m²p.4
- Specific power
- 283 W/m²
- Blade length
- 83.9 m
Wind conditions
- Cut-in wind speed
- —
- Rated wind speed
- —
- Cut-out wind speed
- —
- IEC class
- —
Drive train & tower
- Drive train
- DFIG
- Generator
- 6,750 kW, 1,140 V
- Tower
- steel conical
Commercial
- Status
- In production
- Segment
- Onshore
- First installation
- —
- Markets
- —
- Certifications
- EPDITALY1050 (EPD, released 2025-08-27)
Top rating of Envision's EN171 family, certified in 6.0, 6.25 and 6.5 MW steps on the same 171 m rotor (22,965 m2 swept). Built at Jiangyin (Wuxi, Jiangsu); 83.9 m Envision blade, DFIG rated 6,750 kW at 1,140 V, DC pitch motors, steel conical tower, 100.6 m hub height, 25-year design life.
Read out of the document
These figures were not taken from a summary of a brochure. scripts/audit-provenance.mjs re-opens the archived page, finds the quoted line and rebuilds the number from it; a citation that stops matching fails the build.
| Field | Published | The document says | Page |
|---|---|---|---|
| Rated power | 6.5 MW | 6500 kW (EN-171/6.5) | p.4 [1] |
| Swept area | 22,965 m² | 22965 m2 (EN-171/6.0, EN-171/6.25, EN-171/6.5) | p.4 [1] |
| Hub height (min) | 100.6 m | 100.6 m (EN-171/6.0, EN-171/6.25, EN-171/6.5) | p.5 [1] |
- [1] “EPDITALY1050 - Envision EN171-6.0/6.25/6.5 and EN182-6.25 wind turbine EPD (released 2025-08-27, updated 2026-07-22),” epditaly.it. Accessed: Nov. 18, 2026. [Online]. Available: https://www.epditaly.it/wp-content/uploads/2016/12/Envision-Energy-Wind-EPD001-update-May-2026.pdf
Other Envision Energy Co., Ltd. models
Sources for this specification
- [1]“EPDITALY1050 - Envision EN171-6.0/6.25/6.5 and EN182-6.25 wind turbine EPD (released 2025-08-27, updated 2026-07-22),” epditaly.it. Accessed: Nov. 18, 2026. [Online]. Available: https://www.epditaly.it/wp-content/uploads/2016/12/Envision-Energy-Wind-EPD001-update-May-2026.pdf OEM document
- [2]“EPDItaly registration page - Wind turbines EN171-6.0/6.25/6.5 and EN182-6.25,” epditaly.it. Accessed: Nov. 18, 2026. [Online]. Available: https://www.epditaly.it/epd/wind-turbines-en171-6-0-6-25-6-5-and-en182-6-25/ OEM document
Compiled 2026-11-19. Specifications change without notice — confirm against the manufacturer's current datasheet before tendering.